Lippert Ground Control 3.0

[boatman22]

I have the Lippert Ground Control 3.0 6pt system I installed on my Toy Hauler. I really like the system when it auto levels. The 1 thing I don't like is when you have to manual level the center stabilizers jacks do not work. Has anyone figured a workaround to get these to work? (hack)? We boondock a lot and the ground is not very level most of the time.

[chaps2018]

We have found the best solution in a severely out of level site is to level the trailer using Lynx blocks as much as possible then letting auto level run.

Regarding control of the middle jacks, have you tried this from page for in the owners manual: BASIC JACK OPERATION?

“Middle jacks, if equipped, can not be extended or retracted in standard mode or manual mode. Middle jacks can only be operated in the special jack code error mode. In order to operate the middle jacks press "LEFT" (Fig. 1H) and "RIGHT" (FIG. 1I) buttons simultaneously.”

[boatman22]

From my understanding, the only time you can manually retract the center jacks is when there is an error code. Then you can press the L-R and hold the center jacks will retract. I just went out to try and it does not work. Hoping someone has a work around that they have discovered.

[Witch Doctor]

Originally Posted by boatman22

From my understanding, the only time you can manually retract the center jacks is when there is an error code. Then you can press the L-R and hold the center jacks will retract. I just went out to try and it does not work. Hoping someone has a work around that they have discovered.

If I were you I would call lippert they are very good about helping people and answering questions. I’m not a fan of lippert , but they have always been there in the tech dept. I had to call them a couple of times with my auto level system, they explained and walked me through the solution, I’m sure they can help.