Bed mattress and TV

[WolfWhistle]

John that is what I did.... Ran _Cat5e with HDMI adapters... When u added the sound system. Ran 3 ti new cabiner (BR tv as well) and toy garage. I was concerned about the heat (receiver seems very hot) so I added a computer fan and plenty of vents. Maybe you can see a little from the pics.

[WolfWhistle]

I didn't think I would like foam but I was wrong (first or second time that has happened

[Play Harder]

Really like the shelves - I'm still working on a warranty list to get done then I've got some sweet mods to do - can't wait to give you some competition 😜😜😜😜


Get out and Play Harder😛

2016 XLR Hyper Lite 29hsf - loaded picked up 3-24-2015😊
2008 Can Am Spyder
Kite Boarding is my Addiction - GOT WIND!

[JohnRiordan]

WW I remember you adding the outlet there and I was wanting to do the same in which I was prompted to do when I put my dish receiver in. I didn't want to have to deal with fishing wires so I used a 211k receiver which has a coax out as well. I don't have a sat input on outside so I used factory cable in port. So with the coax already there I hooked the coax to the out on back of receiver and then sat in went to the port that goes to the outside plug. The cabinets look great and love what you did with the wall where TV is.

[WolfWhistle]

JR, I don't have a separate SAT connection either. I thought HD was needed and didn't use the COAX from the access compartment to the TV, but that would have been way easier.
WW

[WolfWhistle]

Originally Posted by Play Harder

Really like the shelves - I'm still working on a warranty list to get done then I've got some sweet mods to do - can't wait to give you some competition 😜😜😜😜


Get out and Play Harder😛

2016 XLR Hyper Lite 29hsf - loaded picked up 3-24-2015😊
2008 Can Am Spyder
Kite Boarding is my Addiction - GOT WIND!

Hey PH, the shelves in the pantry were quite easy to do. They are not fancy. I had some left over 1/2" CDX and 1x2s. Only the faces are done fairly well. It makes the pantry much more usable.

The shelf below the TV folds down, otherwise the slide would hit it and it is also very low. But, perfect for the coffee maker and what-not. That wall is interesting, in that there is really only a 2x6 vertically in the center; then you are trying to support the ends with only 1/8" paneling. If your screws are too long, you could hit the sliding doors, obviously.
WW

[stevejd235]

Originally Posted by WolfWhistle

Hey PH, the shelves in the pantry were quite easy to do. They are not fancy. I had some left over 1/2" CDX and 1x2s. Only the faces are done fairly well. It makes the pantry much more usable.
WW

WW,
My DW has many of your mod's on my honey do list.

• Under bed storage doors
  Coffee mug holders
  Pantry shelves
  Pull out drawers by frig
  etc

Can you please stop coming up with all the great ideas...

[tstillman]

Too funny.

[WolfWhistle]

Originally Posted by stevejd235

WW,
My DW has many of your mod's on my honey do list.

• Under bed storage doors
  Coffee mug holders
  Pantry shelves
  Pull out drawers by frig
  etc

Can you please stop coming up with all the great ideas...

Those pullout drawers were a heck. I wanted them wide as possible, which started the hassle. So, if you make them, allow for the drawer to clear the back side of the door. I have to be almost out of ideas... all I can think of now is adding Solar and a second AC unit.
WW

[WolfWhistle]

Originally Posted by tstillman

Too funny.

These are my friends who are always busting my chops. Who needs enemies.
WW

[tstillman]

Sounds like really good friends to me. (';' )

[stevejd235]

WW,
Like I have said many times before....THANK YOU. Your mod's are always very practical and your always willing to help out.

No back to regular chop busting...

[The Big Toe]

Talalay Latex rules.

It is naturally hypo-allergenic and anti-microbial (resists mold, mildew and bacteria) but is expensive.

Not all Talalay Process latex is created equal. Learn about it.

Memory foam is okay. A little hot.

Innerspring is still the best bang for the buck. A Marshall Spring system like in a Simmons is very comfortable but they don't last all that long and tend to get body impressions easily. I have one (not a Simmons, BTW) and I, frankly my Dear, don't give a da....

Everybody's different. We all have different bodies and different curves.

Hooray for curves!