Intro and XLR advice

[holtbv62]

Originally Posted by Donnieburnett2

I looked at my tanks last evening and tried to look at why the supple tank will only fill very slow ( the Gen tank fills just fine ) I thought the vent hose was kinked or pinched because when filling the tank it would blow back like it was full. That was not the case, so with that I will be looking for more answers on this and if I find anything out I will post here.

Donnie

Same thing here. I'm not sure what the capacity of the generator fuel tank & supply tanks even are on the 415. When I pumped gas into the supply tank yesterday it blowed back a couple of times.

I was however able to pump diesel in the truck and gas in tanks on the TH in one stop. Of course I blocked 2 other pumps in the island. Almost took a pic but didn't want to pi$$ of the others waiting for the diesel pumps.

I've got a 40gal xfer tank on order to put in the back of my truck so I have some flexibility on choosing when and where to refuel.

[Donnieburnett2]

415 has 18gal Gen and 30gal transfer

[holtbv62]

Originally Posted by Donnieburnett2

415 has 18gal Gen and 30gal transfer

Thanks Donnie!

That means I only got the xfer tank about half full.

The fill tubes seem pretty level. Not much of a downward slope to them. Pretty much had to hold the gas nozzle while filling because not much resistance to keep the nozzle from falling out.

-Bobby

[Jeff Auton]

I have a 2014 300x14 and I have the same problem filling the fuel tank.


Sent from my iPhone using Forest River Forums