Pictures of RZR 800 in hfs27
I looked all over this forum, but I could not find any pictures of a RZR in a toyhauler. So here you go. I hope it helps someone on making a choice. I can tell you it will fit with brushguards on, BUT it will rub the ramp and bath doorway. It is very tight. I took the front brushguard off (only 4 bolts) and that gives you about an inch in the back and 1/2 inch in the front. I will put blankets at front and back so it doesn't rub. The RZR is backed in.
A RZR 900 may not fit in length. I know they are wider then the 800, but I am not sure of the wheelbase.
Height is not a problem or width. I think it would fit under the rear bed when raised. I took mine out.
|