XLR 29HFS outside light wiring error

[WolfWhistle]

I have heard of several 29HFS owners finding their outside lights are wired wrong from the factory. To get their outside lights to burn, they must have their inside lights on. It is a warranty issue, but should be easy to fix and could save a trip to the dealer. I am posting a picture of my switches, which are correctly wired as a comparison for you to look at. I think the issue is that the factory installer connects the white / orange tracer wires up wrong. There are more than one white / orange. Two of them are hot (positive) and one goes to the inside lights. Again, this is how the three switches are supposed to be wired. From left to right - Inside lights (3) - Outside light - LED light rope on the awning. I Hope this helps.

[laurajean]

Great, this will be a help...
How difficult to remove switch box?
John


Sent from my iPad using Forest River Forums

[WolfWhistle]

Originally Posted by laurajean

Great, this will be a help...
How difficult to remove switch box?
John


Sent from my iPad using Forest River Forums

Just, pop off the rectangular surround by placing a flat blade or putty knife between surround and wall, then you will see 4 screws into the paneling attaching the switch housing to the wall.