Are the pipe/hose pieces flexible enough that they can be pushed up into the hole AS the sheet is moved in one direction or another?
To reinstall merely push sheet in from other direction (if possible) so the bend of the pipe is not hooking into the sheet as it moves Once re-attached the pipes could be realigned with some heat from a hair dryer.
Also, is it possible to work the sheet to one side or another to allow it to be dropped below the "track/support"?
As a last resort one might just resort to cutting a piece of the material out to provide enough room to remove/cut off the pipe for clearance. When work is done and corroplast is replaced, splice the cut off pieces of pipe back in place with appropriate fittings and secure cut out piece with some sheet metal and screw patching.
__________________
"A wise man can change his mind. A fool never will." (Japanese Proverb)
"You only grow old when you run out of new things to do"
2018 Flagstaff Micro Lite 25BDS
2023 f-150 SCREW XLT 3.5 Ecoboost (The result of a $68,000 oil change )
|