Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×


Reply
 
Thread Tools Display Modes
Old 10-19-2012, 09:47 AM   #1
Junior Member
 
jt1920's Avatar
 
Join Date: Jul 2012
Posts: 18
Blowing Out Water Lines

Our winters are generally mild here in the Pacific Northwest so we camp throughout the year and I don't do a full winterization of our rig. I drain the water heater, empty and remove the water filter, open all taps and pour RV antifreeze into each sink, the shower and my tanks after every trip. This year I'd like to take it a step further and blow my lines out but I want to be careful and not use too much air pressure. For those of you that use air to clear your lines what PSI do you set your air compressor to?

Thanks in advance for your help.
__________________
---------------------------------------------------------------
John, Laurie & the 2 Schnauzers
2008 Ford F350 6.4L CC SRW - 60th Anniversary Edition
2013 Cardinal 3030RL
B&W Companion Hitch
“Trail Air” air bag pin box
jt1920 is offline   Reply With Quote
Old 10-19-2012, 09:58 AM   #2
Senior Member
 
Join Date: Jul 2011
Posts: 1,367
I set my compressor at 40 PSI. I really wouldn't go much higher then that.
Len & Cheri is offline   Reply With Quote
Old 10-19-2012, 10:17 AM   #3
Phat Phrog Stunt Team
 
TURBS's Avatar
 
Join Date: Aug 2011
Location: Iowa
Posts: 34,507
25 psi is what's recommended.
TURBS is offline   Reply With Quote
Old 10-19-2012, 10:23 AM   #4
Senior Member
 
Join Date: Jul 2011
Posts: 1,367
Who recommends 25?
Len & Cheri is offline   Reply With Quote
Old 10-19-2012, 10:34 AM   #5
Phat Phrog Stunt Team
 
TURBS's Avatar
 
Join Date: Aug 2011
Location: Iowa
Posts: 34,507
My flagstaff owners manual.
TURBS is offline   Reply With Quote
Old 10-19-2012, 10:40 AM   #6
Member
 
Lynkage's Avatar
 
Join Date: Sep 2012
Location: Southeast Utah
Posts: 1,157
Pumps run between 40-45 psi and regulators are around 50-60psi, PEX is rated around 100psi.

40psi should be adequate pressure for doing this job for any trailer.

I do about 45-50psi as my system should handle that. If it fails there, it will when you least expect it!

Edit: I also carry a PEX crimper, pipe and fittings just in case!
__________________
Shane & Antoinette
2012 Ford F-450 SuperDuty
2013 Crusader 355BHQ
Lynkage is offline   Reply With Quote
Old 10-19-2012, 11:09 AM   #7
Senior Member
 
Crusader's Avatar
 
Join Date: Dec 2011
Location: Michigan
Posts: 515
Quote:
Originally Posted by Lynkage View Post
Pumps run between 40-45 psi and regulators are around 50-60psi, PEX is rated around 100psi.

40psi should be adequate pressure for doing this job for any trailer.

I do about 45-50psi as my system should handle that. If it fails there, it will when you least expect it!

Edit: I also carry a PEX crimper, pipe and fittings just in case!


40 psi at a wholesale water meter...................so 40-45 is perfect.....thats what I have done mine at for 25 years of R.Ving, and have never had a problem yet.
__________________
TV= 2012 F-150 FX4 Supercab
FW= 2011 270ret Crusader
Hitch= Reese Pro Series 16K Hitch
Crusader is offline   Reply With Quote
Old 10-19-2012, 11:14 AM   #8
Junior Member
 
glenwood63's Avatar
 
Join Date: Oct 2012
Location: Central Illinois
Posts: 7
Quote:
Originally Posted by Crusader View Post
40 psi at a wholesale water meter...................so 40-45 is perfect.....thats what I have done mine at for 25 years of R.Ving, and have never had a problem yet.

Do you also use RV anti freeze in the water lines?
glenwood63 is offline   Reply With Quote
Old 10-19-2012, 11:30 AM   #9
Senior Member
 
Crusader's Avatar
 
Join Date: Dec 2011
Location: Michigan
Posts: 515
Quote:
Originally Posted by glenwood63 View Post
Do you also use RV anti freeze in the water lines?
No, The only anti freeze I use, is a cup of anti freeze down all drain traps. I also remove the H/W tank plug for the winter. The last thing I do is make sure that the holding tanks are empty from the drain traps old water.
__________________
TV= 2012 F-150 FX4 Supercab
FW= 2011 270ret Crusader
Hitch= Reese Pro Series 16K Hitch
Crusader is offline   Reply With Quote
Old 10-19-2012, 11:43 AM   #10
Senior Member
 
Fire Instructor's Avatar
 
Join Date: Jul 2010
Location: Upstate (Albany Area) NY
Posts: 832
I run my regulator down to about 30-35 psi. Keeps thge faucets from "spitting" too much. Higher air pressure,and you can damage lines (especially when you start exceeding 50 psi), plus it makes a splatter mess.
__________________
Fire Instructor

2022 Coachmen Leprechaun 319MB
2022 Ford Ranger toad
Fire Instructor is offline   Reply With Quote
Old 10-19-2012, 11:48 AM   #11
Member
 
Lynkage's Avatar
 
Join Date: Sep 2012
Location: Southeast Utah
Posts: 1,157
Quote:
Originally Posted by Fire Instructor View Post
......... plus it makes a splatter mess.

I hang a hand towel over my faucets to keep that in check.
__________________
Shane & Antoinette
2012 Ford F-450 SuperDuty
2013 Crusader 355BHQ
Lynkage is offline   Reply With Quote
Old 10-19-2012, 11:51 AM   #12
Phat Phrog Stunt Team
 
TURBS's Avatar
 
Join Date: Aug 2011
Location: Iowa
Posts: 34,507
I'm not saying 40 psi is right or wrong just stating what's in my manual.
Do as you please.

Turbs
TURBS is offline   Reply With Quote
Old 10-19-2012, 12:04 PM   #13
Phat Phrog Stunt Team
 
AquaMan's Avatar
 
Join Date: Apr 2012
Location: Tipp City, OH
Posts: 7,154
If you have your faucets open, and your bottom drains it won't matter how much air pressure you use. You'll never be able to put enough air into the lines to build up any type of pressure to blow a line apart, unless you're using a commercial air compressor, and then you would have to have special fittings to accept the cfm it would take to bust a line. I have compressors from 40hp to battery operated, and I run 90-120psi from the compressor into the water line, and the back pressure guage barely moves.
__________________
2016 Georgetown 364TS
2017 Jeep Rubicon Recon toad
Nights Camped 2019 - 17
AquaMan is offline   Reply With Quote
Old 10-19-2012, 12:05 PM   #14
Senior Member
 
Join Date: Jul 2011
Posts: 1,367
Quote:
Originally Posted by jt1920 View Post
Our winters are generally mild here in the Pacific Northwest so we camp throughout the year and I don't do a full winterization of our rig. I drain the water heater, empty and remove the water filter, open all taps and pour RV antifreeze into each sink, the shower and my tanks after every trip. This year I'd like to take it a step further and blow my lines out but I want to be careful and not use too much air pressure. For those of you that use air to clear your lines what PSI do you set your air compressor to?

Thanks in advance for your help.
If you have a Flagstaff you need to use no more then 25 PSI, all others can use 40-45 Just picking at you Turbo. I was going to assign you an acronym by using your new "Free Advice Giver" name, but once I shortened just using the first letters it just wasn't right

Seriously to the OP, it's perfectly safe to 40PSI. Here are some links if you don't believe us:

Winterizing with Air

Country RV - RV Quick Tips

Americamp RV Sales
Len & Cheri is offline   Reply With Quote
Old 10-19-2012, 12:10 PM   #15
Phat Phrog Stunt Team
 
TURBS's Avatar
 
Join Date: Aug 2011
Location: Iowa
Posts: 34,507
Lol f.a.g
Good one!

Nope I upgraded to a wonderfull sabre!

It's all good!


Turbs
TURBS is offline   Reply With Quote
Old 10-19-2012, 12:47 PM   #16
Member
 
Lynkage's Avatar
 
Join Date: Sep 2012
Location: Southeast Utah
Posts: 1,157
Quote:
Originally Posted by f1100turbo View Post
Lol f.a.g
Good one!

Nope I upgraded to a wonderfull sabre!

It's all good!


Turbs
Now that was funny!!
__________________
Shane & Antoinette
2012 Ford F-450 SuperDuty
2013 Crusader 355BHQ
Lynkage is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Disclaimer:

This website is not affiliated with or endorsed by Forest River, Inc. or any of its affiliates. This is an independent, unofficial site.



All times are GMT -5. The time now is 09:45 AM.