Camco Rhino Flex Sewer Hose

[amforelectronics]

My sewer hose end came off. Anyone know how to fix this?
Thanks
Alan

[doc73]

Take the ring and screw it onto the hose. Step from Rhino people: Coat the end of the hose and the threads of the ORANGE part with a good lathering of Vaseline. It acts as a sealant to keep things from dripping (it worked for me). Follow the arrows on the ORANGE piece and screw it onto the hose (keep the ring away from it at this point). I thing it was left to tighten, not the usual righty tighty.

After the hose is screwed up tight to the inside of the threads on the orange thing (not to tight or it might break loose and you need to start again) thread the ring back towards the orange part and tighten so it rachets onto the "teeth" of the orange part.

[gspot01]

Yup. Mine came with a good coating of Vaseline-like stuff that got all over everything. Kind of disgusting and I hadn't even put it to use yet. Iirc, one of those pieces is reverse-threaded.

Sent from my SM-T320 using Tapatalk

[doc73]

Yes, I just re-lubed mine the other day due to a slight drip of poo water... YUCK!

I think it was the ORANGE part that was reverse threaded. It said on mine which way to tighten and loosen.