Got our wolf pup 16bhs in February. Just got back from our second trip and noticed the hot water isn't hot, just warm. Checked all the valves per diagram on this forum and everything is correct. We only use the electric supply, not the gas. Will it be hotter by using gas or both at the same time? Is there an adjustment to make it hotter? Any help is appreciated.
Water heater has a fixed thermostat. Check the outside shower if you have one. If the faucets are on and the spray head shut off, it will allow cold water to mix with the hot. Also check to insure that WH bypass valve is perpendicular to the pex.
Linear Mode
