Palomino Solaire 317BHSK

[billt01]

Does anyone know where the Water filter is located on the 317BHSK to see if it has been installed? I received a wrench with the owners manual, but I cannot seem to locate the filter.

[TURBS]

Originally Posted by billt01

Does anyone know where the Water filter is located on the 317BHSK to see if it has been installed? I received a wrench with the owners manual, but I cannot seem to locate the filter.

It'll be right next to your water pump if you have an idea where it is.


Turbs

[billt01]

I appreciate that insight....Our PDI was less than helpful...I knew more about the TT by reading on the forum from the last few weeks than our tech did. One thing that I did not find on here was the location of the water filter. I do have a hidden access point outside the shower that it might be located in, but have yet to start taking it apart to look for it.

Originally Posted by f1100turbo

It'll be right next to your water pump if you have an idea where it is.


Turbs

[TURBS]

Originally Posted by billt01

I appreciate that insight....Our PDI was less than helpful...I knew more about the TT by reading on the forum from the last few weeks than our tech did. One thing that I did not find on here was the location of the water filter. I do have a hidden access point outside the shower that it might be located in, but have yet to start taking it apart to look for it.

Normally the water pump is right behind where your city water and fw fill station is but inside camper.
May be behind a hidden panel or in a cubby.


Turbs

[Marshmstr1]

On my 269 it's located behind a panel where the park water connection is.

[billt01]

not to hijack my own thread...but is it possible to bypass this filter and use one that s inline with the city hookup from the site?..If so what are the particulars...

[Marshmstr1]

I don't use built in filter, it stays bypassed. I use a inline filter on my hose. It's to easy vs removing items in storage, unscrewing panel, wedge myself inside to change built in filter.

[billt01]

Being a newbie here.....whats the best way to "bypass" and use the inline...

Originally Posted by Marshmstr1

I don't use built in filter, it stays bypassed. I use a inline filter on my hose. It's to easy vs removing items in storage, unscrewing panel, wedge myself inside to change built in filter.

[TURBS]

I've said this before but you have to be very careful when buying inline filters as there micron ratings tend to be in the 30+ RANGE which isn't filtering much at all.
I have a chart in the library that shows micron ratings and what they filter.


Turbs

[billt01]

Thank you..

I think I will use and replace the stock filter (when I can locate it...)

Originally Posted by f1100turbo

I've said this before but you have to be very careful when buying inline filters as there micron ratings tend to be in the 30+ RANGE which isn't filtering much at all.
I have a chart in the library that shows micron ratings and what they filter.


Turbs

[howellma]

During my pdi, i was shown the location, in the le ft cargo compt, just fwd of the hookup. You have to remove a small wooden panel held on with screws

[billt01]

Howellma...

THANKS A BUNCH!!!!

Originally Posted by howellma

During my pdi, i was shown the location, in the le ft cargo compt, just fwd of the hookup. You have to remove a small wooden panel held on with screws