Pex water lines and furnace housing
Prepping for cool weather camping I wanted to test the furnace to make sure there was no issue. I opened up the access panel to take a look around the furnace and make sure everything was clean and in place. To my amazement there were both hot and cold water lines (they run horizontally from the pump located under bathroom vanity up to the kitchen sink) and both lines are touching/laying on the top of the furnace. My furnace is located under my stove and oven. I shut the furnace off.
Do I need to try and zip tie these lines up from the furnace housing or are they supposed to be that way. Seems they would melt and cause a major leak if left sitting on the furnace.
Thanks.
|