Originally Posted by f1100turbo
Your fine !
Its pipe thread and you should normally "see" threads even when tight.
Did you drain the water filter canister and remove the filter ?
do you have an outside shower ? and blow those lines out ?
Did you blow out toilet and pour antifreeze overr the seal ?
I didn't have the filter in the canister. I don't believe there was any water in the canister when I looked.
I do have an outside shower. I opened both those taps & the extra valve on it. So the air hit the outside shower.
I held down the toilet flusher while the air was on. Some mist came out then stopped. Yes to pouring antifree over the seal (+ some down the black tank too).
Actually, I bought two gallons of antifreeze but only used one. Poured the gallon about equally into the following 4 places - both kitchen sink drains (double sink), bathroom sink, shower, & toilet as mentioned above.