Y-Connector

[sideout1961]

Does anyone have the Y-Connector for the Rhino Hose? I just ordered one and realize that the connection to the Y doesn't match the end of the hose. It looks like I need the same fitting that is at the camper end to attach it to the Y. I can't seem to find this fitting anywhere unless I'm missing something. Any help would be appreciated.

[LadyWindrider]

Don't know for sure about the Rhino hose, don't know what is different about it. Most sewer hoses are 3 inches, and that's about it. They use a bayonet fitting on the end at the camper, and various elbows/adapters on the other. Camping world would be a place to check online, as they sell the Rhino hose. Since you just ordered one, might check with who you ordered from.

[Rebel702]

Look here for the connector.
Amazon.com: Camco 39783 RhinoFLEX RV Bayonet Fitting with Locking Ring: Automotive

[sideout1961]

Thanks Rebel, that's just what I was looking for. I ordered the Y from amazon but couldn't find this adapter.

[caper]

I have the "Y" connector and it already had the pins needed to attach the hose. There is also a "Y" with out the pins that is used for hoses that are clamped on with the metal hose clamps.

[sideout1961]

Caper, are you saying that I don't need the adapter that Rebel listed? The picture of the Y looks like it needs the bayonet connector unless I'm not seeing something.

Amazon.com: Camco 39812 RhinoFLEX RV Wye: Automotive

[camper_Lucy]

Sideout1961, you will need that Y for a Rhino hose, and you will also need the 5' extension to get the elbow to the ground connector on between the Y and the end.

Amazon.com: Camco 39765 RhinoFLEX 5' RV Sewer Hose Extension Kit with Coupler: Automotive

[sideout1961]

Boy this is really getting expensive with all these adapters. All I want to do is get both my sewer and galley tank into the same hole so I don't have to keep moving the hose. My galley outlet is under my slide and a pain to get to.

[camper_Lucy]

Originally Posted by sideout1961

Boy this is really getting expensive with all these adapters. All I want to do is get both my sewer and galley tank into the same hole so I don't have to keep moving the hose. My galley outlet is under my slide and a pain to get to.

Have you considered just piping them together behind the release valve and then you will only need one flexible hose?

[caper]

Is this the style you have purchased? It is the type I have. You do not need any extra hose the "Y" will attach directly to the fitting at the sewer end. I have the same set up with my galley under the slide out.

[sideout1961]

I have seen on here people that have done that. I would have to check to see if that's possible. I have an enclosed underbelly and the galley valve is in front of the axle

[sideout1961]

Caper, I order the Rhino flex Y. Looks like the one you posted. I posted a link to it in an earlier post.

[caper]

If you have this "Y" and Rhino Flex hoses you will not need any adapters. The hose clips to the "Y" and the "Y" attaches to the sewer adapter. I have the long hose going from the black and shower outlet and a 5' from galley outlet. Works great.

[sideout1961]

Thanks for the info Caper. I am receiving the Y tomorrow and will check it all out.

[camper_Lucy]

Guys
He has the rhino flex hose (see link) the elbow will not connect to the Y, I have one, you would need a different elbow with the std connectors, and a replacement end. It's cheaper to get the extension hose

http://www.amazon.com/dp/B002OUMVWY/...hvptwo=&hvqmt=

[caper]

I have the old style. The new style has the hose attached to the elbow. The old style did not. Sorry if I gave you the wrong info. I forgot that they changed the ends of the hose at the elbow.

[OldCoot]

Check this thread that eliminates the need for a Y. Probably a LOT cheaper that all the adaptors etc.
http://www.forestriverforums.com/for...ank-20516.html