Originally Posted by Retired63
I have a 2011 Rockwood 2608SS. I had 2 batteries installed. I want to put a battery switch on it. I am not sure how exactly to accomplish this. the set up is as follows:
Battery 1 negative pole has white and black on it. White goes to negative on trailer, black goes to battery 2. Positive pole goes to battery 2.
Battery 2 has 2 red wires, one to battery one, and the second to trailer. Negative pole has one to battery one.
I used a battery doctor switch from graingers.
Positions as follows
1 both batteries off
2 battery 1 on battery 2 off
3 battery 2 on battery 1 off
4 both batteries 1 and 2 on
Use positive from each battery to switch.
The the main positive from camper goes to switch.
I left stabilizers + on all the time .