Cigarette plug no longer works

[slayer1000]

I was using in inverter with the cigarette plug adapter in my trailer and one of the times I was removing the adapter I saw a little spark like there was a short and now the 12v adapter no longer works. I tested the inverter in another 12v system and it works fine.

Is there a reset button somewhere or would that normally be a fuse issue?

I would appreciate any assistance or similar issues anyone has had to fix it.

Thanks!

[Big Paul]

If ypu are talking about the male end of cig plug some of those have an internal; fuse it just screws apart fuse is then visable

[F.R.O.G.]

Since the inverter works in other plugs, it's not going to be the fuse in the male plug. You need to check the fuse for the cigarette lighter.

[slayer1000]

After checking all of the blade fuses in the fuse panel and nearly getting to the last one I found one blown. Replaced the fuse and shazam it's working again. Bought extras in case it happens again.

Thanks for the responses!

[Big Paul]

Sorry I went back and reread and yes it would be the cig lighter power plug that fuse may be blown in. I have had some that had the wire come loose on that caused it to not work and fuse was ok.

[Big Paul]

Glad you found the problem