Exterior lights wiring.
I am installing a strip of LED lights outside the trailer just below where the awning meets the trailer. The problem I have is how to get power to the lights. My thought is to drill a hole in either the top or the side and run the wire down to the exterior light switch by the door. I wanted to check to see if I will be able to do that.
My concern is getting the wire down the wall to the switch, which is right below the light. There only 3 feet away and straight down. Also should I drill the roof of the side. I know that either way I will have to seal the cr&% out of the hole but I don't know the preferred location.
Any other suggestion are welcome.
Ed,Jennifer, Dixie and Beau Bianchina
2014 Dodge Ram 1500 Crew Cab
2011 Puma 2011 26 RLSS
Days camping in 2016: 15