External DC Lighting Control

[Billfitz]

Greetings all,

My 23FBSP (2005) has four DC switches on the wall as you enter the vehicle. The switches are on two rows with two on each row. The top right switch controls the inside DC lights. The top left switch controls one of the outside perimeter lights (curbside). The bottom row left switch controls the other perimeter light (roadside). The bottom row right side does not seem to activate anything.

Also, the perimeter lights at the top of the RV above the door on the back-end are in-op. These are bayonet lights behind white lenses and I have checked for voltage there and found no voltage. Would anyone care to advise me on this, maybe where I can get a schematic ?

This forum is a great resource and it is a tribute to the community that it serves.

Thanks,
BF

[TURBS]

On a 2005 it's going to be tough to get much info.
You wont find a schematic for it as there never was one .

Can you take a pic of panel and post it ?
Welcome to the forum !

TURBS

[fonzie]

The last switch could be for entrance step light.....

[Billfitz]

Originally Posted by f1100turbo

On a 2005 it's going to be tough to get much info.
You wont find a schematic for it as there never was one .

Can you take a pic of panel and post it ?
Welcome to the forum !

TURBS

F1100turbo,

Thanks for the help. I will forward them.
Like your rig; my 2006 2500HD is approaching 86K miles and pulls the 23 easily.

Bf