Interior cabinet lighting
We have a 2013 Cruise Lite. I have cut doors into the ends of the bench seats and at the foot of the bed to access the storage without having to lift the bench seats or the bed. In fact, the bed storage is split now since from factory the storage is accessible only from the outside. You need 6' arms to reach the full length of the bed. Now I would like to add lights to the interior of all the cabinets including the factory pantry. I plan on using LED light strips since I will likely buy a 100' roll of it anyway and something similar to "old school" door jamb switches on each door. My problem is, where/how to get 12v power/ground without poking 4 or 5 1/4" holes through the floor and having all the wires junction externally along the frame somewhere. I have ruled out individual battery powered LED's. Any ideas would be greatly appreciated. Thanks in advance.