There are basically three types of light bulbs in a camper.
The 110v screw in and screw out like a house light bulb.
The 'tail light' light bulb that have a 'nub' on each side where it is pushed in. Push in and twist to the right. It will settle into a little slot as a spring pushes on it from the back side. To remove, push in and twist 1/4 to the left and pull straight out.
The push pin type will push right in and you should be able to pull it straight out.
__________________
Brother Les
2013 Forest River Salem Hemisphere SBT312QBUD
2001 CrewCab F-250 7.3 PowerStroke Diesel
SuperChip, BTS transmission, 6.0 Trans Cooler
|