Stabilizer jack fuse
I have a 2014 wild wood haritage glen lite 300BH with the electric stabilizer jacks. After our first trip, the remote would not lower the jacks. I then tried the button to lower the jacks, which worked for a split second. After checking out the setup, I noticed the bolt which secures the wire for the jack had come out, and the wire had been blown to a different position during the trip home. I zip tied the wire back to its original position. The buttons to work the jack work fine now. The wind blown position of the wire must have caused a short.
The power button near the jack has a auto reset fuse, so no problem there. The power supply from the remote control is the problem. Where would I begin to look for a blown fuse on that? The remote still powers the awning and slide outs fine, so I don't believe the problem is with the remote system. I believe the problem to be from the remote control system to the front and rear jack motors.