LED's are in............

[Wooly33]

Hello...........

Got the LED ropes installed in our new Rockwood A212!! Of course they didn't arrive until after our two week trip in the Smoky's. Put the switch by on the bed side so they can be turned off from there. We think it looks great......

[thepoms]

How did you mount them to the wall?


ThePoms
Rockwood
2016 A212HW

[Wooly33]

Hello,
The rope LED's have a 3M sticky bottom, so the are just stuck on the top edge of the 'A'. I had an Aliner before this one, and did the same thing.


I tapped into the power to the LED light cord where it comes out at the joint for the roof.....


Here is the link for the LED's. I got 3 and only used 2 for this project.



http://www.banggood.com/5M-SMD-5630-300-LED-Strip-Light-DC-12V-Waterproof-IP65-p-925551.html


Also got the 'Warm White' instead of the 'white'.

[thepoms]

Excellent photos, thank you!


ThePoms
Rockwood
2016 A212HW

[KansasFR3]

FWIW, I've done other projects with the LED strip lights and have used this dimmer/remote. Pretty handy and works really well since it uses RF. I would guess probably 200 ft+ range.

http://www.amazon.com/Lighting-EVER-...control+dimmer