These are a few of the mods I have done so far. When I first got Rv I was curious to what all behind the walls in bay compartment so I took the panels down and discovered a small leak from hep valve and also had leak on mini block so after Dynamax sent me a new mini block for water cut offs I decided I wanted to keep better check for leaks so I decided to put a hinge door out of plexi glass on any compartment to make it easy to access and check for leaks. Also put a plexi glass over the mini block valve for visual inspection. Other addition was putting the two vents under the bay panel for better circulation to the underbelly. My next addition was purchasing the set of handrails that mount to side of steps main support. I done this because have small grandkids and two of them have already fell. Note I did have to do a little modification to the mounting bracket because door would hit handrail.
yes nice mod to visually inspect the innerworkings. I have also wondered how one should handle all the inspections that should be done often with those screw down panels in the cargo area. Does anyone know if the factory is still screwing those panels in or if the have some sort of slide or hatch access now.