Heater and A/C vents dont work

[Benzo719]

*update*
AC Ducks had the silver tape on from the factory so took that off and should blow just fine. Couldn't just unscrew the unit though had to kind of pull it down with a screwdriver because it's snapped in somehow. Cover the vent on the heater and it didn't really flow noticeably more out of the other vents. Does blow a little bit even with that Main Event open. I think it's just a terrible design. The great in front that I thought was an intake is not take it off and there's just the unit there. Not sure if the intake is outside or what

[Benzo719]

Sry. I use talk text. Duct* grate*

[Bama Rambler]

The furnace ducting from the unit to the bath could be crushed under the floor between the furnace and first outlet. If it's a problem, you could drop the underbelly a little and take a look. It's not too big of a problem to drop a few feet of it and then put it back.

Glad you found the problem with the A/C and even more glad that you came back and let us know what the problem and fix was. It helps us help more people when we know what problems others have encountered.