Ladder repair
Now that I’m ladder savy, I have to be a smart butt and see how many people here have had to do a repair and ask to see if Others know what a stand off and stand off nut are. I fig that way others will read this and gain so knowledge re this problem. The nuts rust away and the screws come loose and when you try to tighten them they sheer off inside the tube with only the threaded part left on the screw inside the tube and you can not take apart because you can not pull the screw off. So you have to cut the head off the screw then remove the stand off, then tap in a new stand off nut in the stand out. I have stainless stand off nuts and screws now. I love saying stand off now can u tell? [emoji51]. Strongberg Carlson sell stainless nuts for this. You have to get screws at hardware dept. there is s host of other challenges when doing this job, like screws may strip when reinstall the stand out etc. how to tap in the nut(there I did not say stand off that time). Btw guess how I discovered this problem, yep, I almost killed myself coming down the ladder. My rig is 6 years old and I use my ladder a lot.
|