need info/help on my dometic power awning

[jk31668]

i have a 2010 sunseeker 3100 ss and just noticed that 2 of the screws on the top rear bracket that holds the awning up were out about a half inch. i tried to screw them back in and found that they dont really tighten good. like they are stripped. i also checked the other 2, plus the ones on the front bracket and they are almost the same. so, any idea what i should do? a larger screw probably wont go thru the bracket hole. any idea how long these screws are? thanx

[OldCoot]

Originally Posted by jk31668

i have a 2010 sunseeker 3100 ss and just noticed that 2 of the screws on the top rear bracket that holds the awning up were out about a half inch. i tried to screw them back in and found that they dont really tighten good. like they are stripped. i also checked the other 2, plus the ones on the front bracket and they are almost the same. so, any idea what i should do? a larger screw probably wont go thru the bracket hole. any idea how long these screws are? thanx

Depending on what is on the inside of the camper, you might be able to drill on thru and put a metal plate and use a regular ss machine bolt/nut.