I need to remove the motor from my Lippert Solera awning. Either a gear has a bad tooth or their is a dead spot in the motor. Anyway, is it possible to remove the motor without the awning unwinding or creating some other unintended consequence?
__________________
Lee and Anne
2016 F250 2WD CC SB XLT 6.2 3,295 lb payload cap.
2014 Salem Hemisphere 282RK 8k lbs loaded, Equal-i-zer WDH, TST 507 TPMS
2021: 35 nights already booked so far
I'm not familiar with Lipperts awning but, I do have experience with Dometic. Your awning may be "pre-loaded" to assist it retract. There may/should be a process to "pin" the roller so when you disengage the motor the spring doesn't unwind.
"PT Crew Members Since 9/2010"
Linear Mode
