2011 V-Lite 21WRS SLIDE ISSUE
We just purchased this trailer from the original owner. Of course the slide was out all times we viewed it. When we picked it up the slide was in and sagged slightly on the left side when looking at the bed. However there is only the one track support with roller on the right wall to support the slide when it's in.
We now, after two weekends of camping in it have a slight issue. The slide floor is now separating from the vertical wall on the left side. Of course when the slide is out it pinches together and becomes rigid when sitting on the rear exterior wall. However I want to fix it properly so that we do not do further damage to anything. Other than the floor of the slide separating from the left wall the rest of it works great as long at you support the slide as it moves out. It seems to me that the previous owner found it smart to sleep on the bed while the slide was in. Definitely no common sense.
Either way the floor has separated from the wall, and normally I would just PL400 it and throw some screws in it to suck it together. However from the bottom of the floor up in to the wall there is nothing but foam insulation to bite into.
I am wondering if anyone has had a similar issue with their 21WRS??