HELP please. I have a 2010 FR sunseeker 3120 33' long. The bedroom slide just started not to work, one side will start to go out but the other side will not got out at all. It starts to jam so I stop it and bring it back in. How does all of this work? any videos on how it all works? How to fix? or do I just give up?
__________________
Dan-Retired California Firefighter/EMT
Shawn-Musician/Entrepreneur/Wine Expert
and Zoe the Wonder Dog(R.I.P.)
2016 PrimeTime TracerAIR 255, pushing a 2014 Ford F150 SCREW XTR 4x4 3.5 Ecoboost w/Max Tow Package
4pt Equal-i-zer WDH and 1828lbs of payload capacity
It has aluminum geared runners (2) on each side that I can see when it is out.
You have a Schwintek slide.
__________________
Richard & Jill
2014 Flagstaff 832IKBS Classic Super Lite
2018 Silverado 1500 Crew Cab Z71 4WD All Star Edition
Camping since 1989, Seasonal since 2000.
Car Shredder Op/Tech, Scrap Metal Recycling - retired
Yep, Schwintek system.
Go to YouTube for numerous troubleshooting videos.
__________________
Dan-Retired California Firefighter/EMT
Shawn-Musician/Entrepreneur/Wine Expert
and Zoe the Wonder Dog(R.I.P.)
2016 PrimeTime TracerAIR 255, pushing a 2014 Ford F150 SCREW XTR 4x4 3.5 Ecoboost w/Max Tow Package
4pt Equal-i-zer WDH and 1828lbs of payload capacity
Well I went out and tried to move the slide out and it stop, then I tried one more time and left side bumped a little and started to go out. I did this one more time and the same thing. So it works a little, but I can't see anything as it is less than 6" from the slide to the wall on both sides.
Find your controller.... it should be under the bed. It's a 4"x6"x1" box. Do you have a hinged piece of plywood under your mattress? If so, lift up the plywood. If you see another piece of plywood screwed down, look under it. That's where I found my controller. Should be lights blinking if you find it.
Yep, YouTube is your friend. Should give you an idea.
Larry
__________________
"Sunny" the 2017 Sunseeker 3010DS
2006 Jeep Liberty Toad
.... and lovin' life........MOST of the time.
Find your controller.... it should be under the bed. It's a 4"x6"x1" box. Do you have a hinged piece of plywood under your mattress? If so, lift up the plywood. If you see another piece of plywood screwed down, look under it. That's where I found my controller. Should be lights blinking if you find it.
Yep, YouTube is your friend. Should give you an idea.
Larry
Bedroom slide out not working
HELP
Linear Mode
