crown gears needing replaced

[TheBoones]

its a really long story and i really don't want to get it into it but i have to replace both crown gears in my Cherokee 28A.

I have the gears, i am a "B" student on fixing things myself. is there an advice on how to do this job?

I am guessing i have to get the slide in the out and stabilize it. then what? I am afraid what might happen when i start disassembling. Is there a diagram or a 1, 2, 3 approach.

[Dave_Monica]

Are you referring to the gear pack assemblies on the cross shaft? If so, here's something I found on Lippert's site... http://www.lci1.com/images/support/lipsheet/0053.pdf

Dave

[TheBoones]

Dave - it isn't the gear pack, but the actual gear they drives the rail...

I think this will work though. I have filtered through the web/parent directory and found some valuable information.

Thanks,
brock

[2012WhiteSolera]

Hey Boones, can you post some links you found, just for any future reference?

[TheBoones]

Index of /images/support

[TheBoones]

It doesn't look like much, you have to drill down and find what you are looking for. I found the manuals and the complist were most helpful.