slide out bracket?

[KarenDLS]

Can anyone tell me where the h#&*! this bracket goes. I found it on the floor between bedroom door and bed. 2012 Sandpiper 346RET. It is a Lippert J-2 roller.

[Iwannacamp]

Looks like a roller for the bottom of the slide to me.

Prolly a bonus. I would try to see if yours are all in place. JMO


Sent from my iPhone using Forest River Forums

[KarenDLS]

When we look under the bed there is only about 1 inch clearance from the floor to the bottom of bed. So I have no clue how it got out. Is there a way to see under the bed without taking the bed completely apart.

[Davidceder]

On my rig I can see the rollers from the outside underneath the slide. They are just on the bottom edge of the opening. Maybe yours are also visible.

[Jerry01]

Originally Posted by KarenDLS

Can anyone tell me where the h#&*! this bracket goes. I found it on the floor between bedroom door and bed. 2012 Sandpiper 346RET. It is a Lippert J-2 roller.

This is where mine goes.
Hope that helps. I took the pic from the foot of the bed. Jerry


Sent from my iPhone using Forest River Forums

[Jerry01]

In case you're wondering why I have that pic, well that is the 2X6 that I put across the bed since the mattress was sagging so bad in the middle. FR didn't think it was necessary to have any support. Go figure. Jerry


Sent from my iPhone using Forest River Forums

[KarenDLS]

Originally Posted by Jerry01

This is where mine goes. Attachment 86546
Hope that helps. I took the pic from the foot of the bed. Jerry


Sent from my iPhone using Forest River Forums

Jerryo1, Thank you. We will look closer tomorrow. Karen