Originally Posted by Jz5g52
Checked the breaker and Forest River must of learned they have a 100amp breaker in there. I was reading the Lippert manual and they said to spray the slides every couple months with silicon lubricant. going to try that and see. Hopefully the weather will get warmer soon only en the 30's high most the week last I check hopefully they are wrong like normal
I'm still a little confused, If your slides are mechanical then spray the toothed bar and wheel with a dry lube, such as you can buy at Napa, CRC makes one. At least 2 x's per year. If it is a hydraulic slide then you spray the ram with coating spray, also made by CRC, that is what the factory gave me. Napa doesn't sell The ram spray DO NOT USE WD 40 use power lube Lubricant w/ PTFE, you can buy it on Amazon for $7.98 a can. hope that helps a little....