|
|
09-04-2016, 10:38 AM
|
#1
|
Senior Member
Join Date: Sep 2011
Location: Komoka Ontario
Posts: 2,680
|
Why would this be?
Weather is good so it's time to look for any more QUALITY or lack of issues, I came across this, one slide has a little float at the ram but this one has a lot, thing is I don't know which one is correct or if they should be loose at all.
__________________
"Well that didn't go as expected"
2015 Chev 2500HD Highcountry Duramax
Cedar Creek Silverback 33IK
Donald&Casey cairn terrier
Rest in Peace Mary my darling wife.
Scottish by birth Canadian by time.
|
|
|
09-04-2016, 10:50 AM
|
#2
|
Senior Member
Join Date: Jan 2014
Location: Ontario
Posts: 521
|
I would not think they should be loose like this but going to check mine. It's at the storage yard right now so I can't just go out in the driveway to check.
__________________
Orval and Yvonne
2016 Flagstaff 27RLWS Emerald Package
2011 F150 SCrew XTR 5.0L 4x4
|
|
|
09-04-2016, 10:55 AM
|
#3
|
Senior Member
Join Date: Dec 2012
Posts: 7,652
|
It's not loose. That is a slide adjustment for in and out travel and allows for even travel of the slide if there is more than one attached to the slide.
|
|
|
09-05-2016, 11:37 AM
|
#4
|
Site Team
Join Date: Mar 2008
Location: Southwest Alabama
Posts: 9,850
|
That's a through frame slide. On page 16 of this manual it tells you how to adjust the nuts. They're not supposed to be snug against the bracket on both sides.
__________________
Salem 29RKSS Pushing a GMC Sierra 2500HD!
Gotta go campin!
|
|
|
09-05-2016, 12:58 PM
|
#5
|
Senior Member
Join Date: Dec 2009
Location: Napa Valley, CA
Posts: 513
|
Based on the rust pattern on the bolt, it looks like that lower nut has moved recently.
__________________
2015 Rockwood A128S
2010 Rockwood 2604
2014 Ford F-250 CC SB 2WD
2008 Toyota Sequoia 2WD
|
|
|
09-05-2016, 01:05 PM
|
#6
|
Mod free 5er
Join Date: Mar 2008
Location: Concord, NC
Posts: 24,702
|
They should be tight against both sides of the bracket.
|
|
|
09-05-2016, 02:08 PM
|
#7
|
Senior Member
Join Date: Feb 2013
Location: Pfafftown NC
Posts: 2,353
|
Using general engineering practices as a guide, if it was suppose to be that way there would be another locking nut on the bottom like above. Doesn't look right to me either.
|
|
|
09-05-2016, 02:39 PM
|
#8
|
Senior Member
Join Date: Jun 2013
Location: mid Michigam
Posts: 124
|
Agree with Bama. Read the manual to check the adjustments. It's got a lock nut on one side and 2 nuts to lock on the inner. Lack of corrosion on the inside is due to movement in and out.
__________________
2013 Salem Hemisphere 286 RLT
2009 Silverado 2500HD
|
|
|
09-05-2016, 02:50 PM
|
#9
|
Senior Member
Join Date: Jun 2013
Location: mid Michigam
Posts: 124
|
Agree with Bama. Read the manual to check the adjustments. It's got a lock nut on one side and 2 nuts to lock on the inner. Lack of corrosion on the inside is due to movement in and out.
__________________
2013 Salem Hemisphere 286 RLT
2009 Silverado 2500HD
|
|
|
09-05-2016, 02:57 PM
|
#10
|
Senior Member
Join Date: Dec 2012
Posts: 7,652
|
Quote:
Originally Posted by Evereddie
Using general engineering practices as a guide, if it was suppose to be that way there would be another locking nut on the bottom like above. Doesn't look right to me either.
|
Look closely, the bottom nut is a nylock nut and therefore a locking nut. It is correct.
|
|
|
09-05-2016, 03:00 PM
|
#11
|
Senior Member
Join Date: Feb 2013
Location: Pfafftown NC
Posts: 2,353
|
Quote:
Originally Posted by bubbles
Look closely, the bottom nut is a nylock nut and therefore a locking nut. It is correct.
|
Yes I see it now. Makes sense but doesn't explain the clean threads. Especially the inside of the threads.
Sent from my SM-N900V using Tapatalk
__________________
There are 10 types of people in the world.
Those that know binary, and those that don't.
2013:31 / 2014:51 / 2015:58 / 2016:37 / 2017:46
2018:16
Total 239
|
|
|
09-05-2016, 03:04 PM
|
#12
|
Mod free 5er
Join Date: Mar 2008
Location: Concord, NC
Posts: 24,702
|
Still say all the nuts should be tight against the bracket.
|
|
|
09-05-2016, 03:10 PM
|
#13
|
Senior Member
Join Date: Feb 2013
Location: Pfafftown NC
Posts: 2,353
|
Quote:
Originally Posted by OldCoot
Still say all the nuts should be tight against the bracket.
|
Yes. Movement that was meant to be would only keep the tips of the threads clean. Not deep into the threads.. It's basic people. If there was movement designed into this area, there would be a collar around the threads.
__________________
There are 10 types of people in the world.
Those that know binary, and those that don't.
2013:31 / 2014:51 / 2015:58 / 2016:37 / 2017:46
2018:16
Total 239
|
|
|
09-05-2016, 03:22 PM
|
#14
|
Senior Member
Join Date: Sep 2011
Location: Komoka Ontario
Posts: 2,680
|
Quote:
Originally Posted by Bama Rambler
That's a through frame slide. On page 16 of this manual it tells you how to adjust the nuts. They're not supposed to be snug against the bracket on both sides.
|
Thank you, reading this now it makes sense, typical cheap RV industry does not use a sleeve.
__________________
"Well that didn't go as expected"
2015 Chev 2500HD Highcountry Duramax
Cedar Creek Silverback 33IK
Donald&Casey cairn terrier
Rest in Peace Mary my darling wife.
Scottish by birth Canadian by time.
|
|
|
09-05-2016, 03:25 PM
|
#15
|
Senior Member
Join Date: Feb 2013
Location: Pfafftown NC
Posts: 2,353
|
Quote:
Originally Posted by DDC
Thank you, reading this now it makes sense, typical cheap RV industry does not use a sleeve.
|
i can't disagree with the cheap RV industry part.
|
|
|
09-05-2016, 03:29 PM
|
#16
|
Senior Member
Join Date: Feb 2015
Location: in my new 29hfsxlr
Posts: 1,658
|
Quote:
Originally Posted by DDC
Thank you, reading this now it makes sense, typical cheap RV industry does not use a sleeve.
|
That would be typical cheap LCI components do not engineer anything well
|
|
|
09-05-2016, 03:33 PM
|
#17
|
Mod free 5er
Join Date: Mar 2008
Location: Concord, NC
Posts: 24,702
|
Quote:
Originally Posted by DDC
Thank you, reading this now it makes sense, typical cheap RV industry does not use a sleeve.
|
I will concede it is as it should be after reading the manual, but I, personally, would remove the bracket, enlarge the hole and make a tube spacer to protect the threads as the way it is now, after a few years of use, if you have to re-adjust it, the threads will be gone.
|
|
|
09-05-2016, 03:41 PM
|
#18
|
Senior Member
Join Date: Dec 2012
Posts: 7,652
|
Quote:
Originally Posted by DDC
Thank you, reading this now it makes sense, typical cheap RV industry does not use a sleeve.
|
If it was a fixed distance between nuts upon install then a sleeve could be used. It is a variable distance between nuts (periodic nut adjustments also have to be made after install in both directions) and I believe a sleeve would be impractical. JMO
|
|
|
09-05-2016, 03:47 PM
|
#19
|
Mod free 5er
Join Date: Mar 2008
Location: Concord, NC
Posts: 24,702
|
Quote:
Originally Posted by bubbles
If it was a fixed distance between nuts upon install then a sleeve could be used. It is a variable distance between nuts (periodic nut adjustments also have to be made after install in both directions) and I believe a sleeve would be impractical. JMO
|
Then I would make different length sleeves. Once the threads are gone, further adjustments are difficult if not impossible.
|
|
|
09-05-2016, 03:50 PM
|
#20
|
Senior Member
Join Date: Feb 2013
Location: Pfafftown NC
Posts: 2,353
|
You could have a bracket with a short sleeve built in. Then it wouldn't be a bracket edge rubbing on the threads.
Still wonder why the clean threads. Maybe someone in manufacturing put thick grease on that section knowing it gets a lot of movement and scrapping.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|