Inverter help needed

[jwakeman]

did get a call back from Sensata and this unit will not charge battery. So now off to hunt the converter.


Thanks for the info agin

[AquaMan]

Originally Posted by jwakeman

did get a call back from Sensata and this unit will not charge battery. So now off to hunt the converter.


Thanks for the info agin

Pull the fuse panel from the wall, it's most likely laying just behind it. May also be able to pull a panel from your basement and access it there also. I was able to see mine in my Sierra by pulling the fuse panel, but had better access by pulling a panel off in the basement.

[jwakeman]

Thanks to all for the info and clarifications. I found the converter box in a vary out of the way place. Found a test procedure that show 12.2 in and 9.5 out. replacement ordered now need to find a small person to install.

[AquaMan]

Originally Posted by jwakeman

Thanks to all for the info and clarifications. I found the converter box in a vary out of the way place. Found a test procedure that show 12.2 in and 9.5 out. replacement ordered now need to find a small person to install.

Did you go with a Progressive Dynamics unit? They cost a little more, but well worth the money if you are replacing anyway. The WFCO's will fail sooner or later.