LED lights on front cap

[Bbbarker194]

How do I turn on the led lights on the front cap of my 2014 32RL Cedar Creek. None of the switches on the indoor electrical panel seem to operate those lights.

TIA

[raspivey]

My cap lights are operated by an external switch. Have you tried looking in the forward storage or on the underside in the hitch area?

[5picker]

My docking light switch is right next to the landing jack switch.

[4x4x4dr]

In our 35IK it's in the pass thru storage on the right side near all the water connections and sewer pulls

[cody1884]

Mine switch is in the utility Bay c.c. 34re

[Jordyn]

My switch is in the utility bay as well in my 36CKTS. Near the tank dump pull handles. A perfectly logical spot, right??

[MOODMAN]

A followon question to the OP....

I have a few elements of the front cap LED light strip that do not work. It appears that the LED strip is protected by some kind of clear coating.

So, has anyone removed these strips, and if so, how? I am thinking it might be easier to let it go and not be so anal about it. But I like everything to be perfect...you know, like you folks

[modem9]

Mine is also by the dump handles in the 29IK. Really stupid location. Inside would have been best but at least put it on the entry door side.

[spock123]

I have a Cedar Creek 32RL and the switch is by the dump handles and guess what they don't work. What could be wrong?


Sent from my iPhone using Forest River Forums

[IICAPN]

It in the utiliy bay on the side opposite the entrance door.

[Scheinin]

Originally Posted by Jordyn

My switch is in the utility bay as well in my 36CKTS. Near the tank dump pull handles. A perfectly logical spot, right??

They can also be controlled from your remote on the 36CKTS.

[Bbbarker194]

Switch is in the utility bay and ours works. Thanks guys!!!

[spock123]

Mine finally came on, I never turn mine on but occasionally. Anyway I know it works


Sent from my iPhone using Forest River Forums

[Hack113]

I have a 2014 29RE. The switch for my LED Cap Lights are in the area with the Docking Station.
There were some complaints in other replies, that the switch should be inside the control panel, inside the camper. I like having the switch on the driver side of the tow vehicle. It is more convenient if you are hooking-up/un-hooking after dark. After all, that is what I use them for the most, lighting the hitch area.