Manual operation of front/rear stabilizers?

[rrolphe]

We have a 2016 Cedar Creek 34RE Touring Edition 5th Wheel. It is equipped with Lippert Controls and auto-level. We bought our 5'r used and was not able to get any one-on-one instruction. Can someone please tell me if it is possible to extend/retract stabilizers manually in the event of a power/mechanical failure and if so where I might find detailed instructions/manual? THANKS!

[dieselguy]

Google is your friend ... just go to Google and type in Lippert Level Up Manual and you'll get several different choices. Here's one for starters.
https://manuals.heartlandowners.org/...%20Poin....pdf
As for operating in a no power situation .. you'll need a reversable power drill, a 1/4" Allen bit, and a 5/32" allen wrench. Here's just one example of how to use the drill. http://www.manualsdir.com/manuals/69...up.html?page=9

[rrolphe]

Thank you Diesel Guy very much!

[SilverbackMel]

Originally Posted by rrolphe

Thank you Diesel Guy very much!

There is usually a marker stick on tab that may be covering the spot where the drill driver is inserted. It’s simply a “dust cover”.

[rrolphe]

Thank you!