Slide seals rotting
2 years back the slide seals turned to sticky jelly like substance that would stick to the outside slide and than pull apart when the slides
were ran out.
Cedar Creek sent me all new seals which I had to pay to be installed. Now this fall when we arrived in Texas I see one seal has turned to this
gummy sticky status about half the length from the top down. I checked the seals every night on the way down and did not see any of this until
our last setup. The slides were in and out for 3 different nights. What is the cause?
This is on a 2012 36RE.
2013 2500HD Duramax