Prism TV mount in bedroom help

[Byron in TX]

Hi all and Happy Easter!
I recently took delivery of a '16 Prism that was factory prepped for a 24" TV in the rear bedroom.
I've purchased an articulating mount and TV to install it but would appreciate any advice on ensuring that I capture the stud(s) and/or if I should just go directly thru the mounting point into the pantry/closet with through bolts to ensure a secure mounting of it.
I've sent a note to Coachmen asking for assistance but haven't heard back.
Thanks!

[B D HOWie]

Contact Ronald Ross at Coachmen. He was very helpful when I installed a backup camera a couple years ago. Reply never more than 2 or 3 days, usually less via email.
Paul

[MarsMan]

I am also interested in this plan. Please let us know if they disclose the location of the mount. Some manufactures out a sticker in that spot. You doing a 12V TV or a normal 110V?

[VTprism]

Hello I have a 2013 Prism 2150 with TV hookup in bed area but no TV yet. I'd like to add wall mount alongside the setup on wall separating from Fridge. Any suggestions on installing a mount ? Is there a particular spot it is intended to be mounted with extra wall support ? Thanks for any suggestions.

[jonwisconsin]

What I did in mine was to attached a 1"x 4" from one stud to another with screws. Then, I attached to TV bracket to the 1" x 4". I painted the piece of wood with flat black paint. Four years later, no problem. I discovered that. the studs location were not useful for the bracket installation.

[VTprism]

To mount a 24" TV in the Prism sleeping are I ended up getting a wide mount @ 16 " and was able to catch a stud on each end for support.