Pursuit Headlight LED Halo Ring

[cberlanga]

Any of you Pursuit drivers ever have a headlight LED halo ring go out? If so how do you change them?

[ResQfrog]

I believe that you have to change out the whole headlamp assembly.

[52chevy]

Any luck figuring it out?

[cberlanga]

Looking on You Tube, the assembly has to be removed, the clear plastic cover heated and removed to get to the halo ring. Then measure the size of the ring and order a replacement (from Amazon). I cannot find a complete new assembly online. That's what I figured out.

[1sd]

I replaced the headlights in my '16 Mirada because the original ones "delaminated". If yours are from the same manufacturer, they're made by "Angel Eyes". Cheap Chinese junk that Coachmen installs. Yours look similar to the Mirada so they should be replacements for 2013-2014ish Tahoe. Google "Angel Eyes headlights" and "Tahoe" and see what comes up.

[cberlanga]

The clear coat on that headlight assembly was peeling also. I did the restoration procedure using wet sandpaper and Meguiars polish followed by a synthetic wax sealant. Its not 100% crystal clear but close enough.