Water, Batt, Tank Status Panel not working

[harlekuin]

Hello:

We have a 2013 Mirada. We had to have the convertor replaced this week because the batteries were not charging off the shore line or generator, only the engine. Now the panel where you check the tank levels, propane, battery status etc won't light up. The generator light works but the indicator lights, nothing. No fuses shown as blown and the lights, slides, all work fine so we know the batteries are good.

Any suggestions? We don't have time to take it back to the dealership, nothing in the owners manual and we are pretty handy so any help would be appreciated.

[Ford Idaho]

Odds are the person who worked on the converter missed a wire hook up.

I would look that area over first.

[Timberdog]

Are you sure there are no inline fuses? The only way to be sure is to check with a volt meter to see if power is going to the panel, good luck.

[harlekuin]

Originally Posted by Ford Idaho

Odds are the person who worked on the converter missed a wire hook up.

I would look that area over first.

Originally Posted by Timberdog

Are you sure there are no inline fuses? The only way to be sure is to check with a volt meter to see if power is going to the panel, good luck.

Thank you both. We will check those.