Lippert Leveling Jacks Master Reset?

[Marnijags]

We had a problem raising the jacks last weekend and I had to do a manual retraction. After I did that the control panel just shows blinking lights along the left side, no error messages, and we cannot turn on the system. A mechanic suggested we need to do a master reset but I cannot find info on this. I have seem some threads about a reset button under the stairs of a different make. Anyone know where it might be in a 2014 FR3?

Thanks for any help.

[edm]

There is a reset able circuit breaker located above the batteries on the right side. The reset is a red lever or flag as it is called.
Good luck.

[edm]

http://www.forestriverforums.com/for...6&d=1459981118

Try this for a lippert manual.

Good luck hope this works.

[edm]

http://www.forestriverforums.com/for...2&d=1400936422

I found a picture of the circuit breaker and were it is. good luck.

[FarGra]

Thank you EDM I've been trying to find a manual for five years!

[colourful64]

Hold down the on off switch. And it will reset

[Dc8mdtmech]

With 4 fingers, hold all 4 blinking arrows down at the same time, this is the reset of the system. My opinion, the auto function is not good or accurate. I only use the manual mode.

[colourful64]

We love the auto level only have an issue if there is an extreme slope.. otherwise dead on...

[tgold]

If can’t find reset or it doesn’t work disconnect the positive battery cable for several minutes. It may force a reset. Or call manufacture they were easy to talk to a person and they were helpful. They also have an app for cell that may be helpful.

[FireSurf]

Originally Posted by edm

http://www.forestriverforums.com/for...2&d=1400936422



I found a picture of the circuit breaker and were it is. good luck.

Hi was this located on the right side by the batteries?

[Combatcoal]

I can’t remember when manual leveling, front to back first, or side to side?