slide problem

welder · 07-13-2015, 04:26 PM

2015 FR3 30DS bed slide will not work on electric. I had to use a drill and the flex driver to bring the slide in. Any help?

twojump36 · 07-13-2015, 04:52 PM

Quote:

Originally Posted by welder

2015 FR3 30DS bed slide will not work on electric. I had to use a drill and the flex driver to bring the slide in. Any help?

Fuse out?

bigduke1956 · 07-13-2015, 04:55 PM

Quote:

Originally Posted by welder

2015 FR3 30DS bed slide will not work on electric. I had to use a drill and the flex driver to bring the slide in. Any help?

we have 2015 FR3 25DS, picked up May 19, had same issue w/bed slide, I had Wife push button, while I pushed in slide, took to dealer, 10 days to fix (under warranty)

welder · 07-13-2015, 04:57 PM

Quote:

Originally Posted by twojump36

Fuse out?

Fuse ok

bigduke1956 · 07-13-2015, 06:36 PM

Quote:

Originally Posted by welder

Fuse ok

slide motor replaced

Papa-t · 07-13-2015, 06:45 PM

I had a Jayco 5er that the slide Moyer broke off and twisted around the bar. It was under warrenty thank God.

svwc · 07-13-2015, 06:55 PM

Sorry to say......
Since you were able to crank it in with the drill method, no gears are stripped
It's probably the DC motor

Sent from my rotten iPhone

H3N · 07-13-2015, 08:46 PM

Maybe there's a short in the rocker button in the command center? Happened to ours. Fixed under warranty. Good luck

welder · 07-14-2015, 11:31 AM

I found a bad connection at the motor.

twojump36 · 07-14-2015, 11:58 AM

Quote:

Originally Posted by welder

I found a bad connection at the motor.

Glad you got it figured out.... shouldn't have happened in the first place though!

Online_17 · 07-14-2015, 03:32 PM

Shoukd have snapped a pic of that bad connection to share if anyone else runs into the sane issue.

welder · 07-15-2015, 09:19 AM

You could not tell the connection was bad until i unplugged it and looked inside the small connector.

You may also like: