|
|
05-31-2016, 12:10 PM
|
#1
|
Junior Member
Join Date: May 2016
Posts: 10
|
Solar panels
Who has installed a solar panel in their RV to keep a charge on the coach batteries and did you consider it worth the investment?
|
|
|
05-31-2016, 12:21 PM
|
#2
|
Senior Member
Join Date: Nov 2015
Location: Pleasant Gap, PA
Posts: 458
|
I just did it last month and it is definitely worth it. I put a 100 watt Renogy on the roff and ran the wires down the fridge vent and under the trailer to the battery box. We don't store our trailer at the house so I would have to remove the 2 batteries each time we park it and bring them home to charge. Our electric power is mainly from solar. We had two panels that are deployed on the ground and now we have the third panel on the roof for even more amps.
__________________
2015 Solaire 201SS
2015 GMC 2500HD Duramax
|
|
|
05-31-2016, 01:08 PM
|
#3
|
Member
Join Date: Sep 2014
Location: Richland, WA
Posts: 34
|
I just installed a 200-Watt flex panel kit from Go-Power and a 1000-Watt Inverter to power small appliances (slow cooker, Ice maker, etc.) while boondocking. Well worth the effort and cost in my opinion.
I don't like generator noise if I can avoid it. I just use the outlets on the inverter to power the appliances when needed; it allows me to quietly fish for a couple of hours without having the generator running.
The system does keep the batteries charged and conditioned.
__________________
Desert Kicker
2015 FR3 30DS
|
|
|
05-31-2016, 11:21 PM
|
#4
|
Junior Member
Join Date: May 2016
Posts: 10
|
Thanks guys, I'm scheduled to get them installed on Tuesday.
|
|
|
06-01-2016, 10:33 AM
|
#5
|
Senior Member
Join Date: Apr 2014
Location: Oxnard So. Cal
Posts: 141
|
Desert Kicker did you install a battery monitor readout? We have the Go pro portable solar panel 120W the 1000W power inverter which we just installed and are all connected directly to the batteries. We want it just for TV in the evening while boon-docking. Do I need to turn off the house power when the inverter is on? Currently I have nothing telling me the battery charge level and usage other than the little lights on the stock panel. I know I have to turn off inverter before charging the batteries. Suggestions and how to appreciated. Pictures are even better. Thanx
__________________
2016.5 FR3 30DS AKA "Serenity"
Searching for that perfect spot with loving Wife & 2 mini dachshunds
|
|
|
06-01-2016, 11:14 AM
|
#6
|
Senior Member
Join Date: Oct 2012
Location: Mile Hi City
Posts: 639
|
I installed 2 265w mono panels on the roof with an outback flex80 controller. We boondocked this past weekend and when I looked at the meter, the panels were pumping 14A into the batteries so it definitely was worthwhile. My next addition is to add a battery monitor (Victron BVM700) to give me a future run time analysis. I have a AC transfer switch and a 2K inverter but I'm struggling on the placement given the current wiring and the enclosed underbelly.
__________________
2015 Denali Duramax 2500
2017 Coachmen 229TBS
|
|
|
06-01-2016, 12:04 PM
|
#7
|
Member
Join Date: Sep 2014
Location: Richland, WA
Posts: 34
|
My 200-Watt solar kit included a solar controller which tells current battery charge, amps coming in, and volts. I also have a remote controller for the inverter that tells me state of the battery while the inverter is in use. The setup is not a true battery monitor however. I can't tell how many amp-hours any particular device uses, but I can tell if the batteries are getting low and get a good estimate of how fast they are draining.
I do not have my inverter connected to the house circuit. I use the outlets on the inverter to power whatever device I want to use, and typically for fairly short durations. I've never tried running a TV off of the inverter. I primarily use mine to power a small ice maker, slow cooker, or the occasional air pump.
I decided on my setup as based on the desire to not have the generator running while I was away from the motorhome for two or three hours, and still having the ability to have a meal cooking in the slow cooker or be making ice in the ice maker.
The Go Power site has a handy calculator to help decide what is needed for what applications, and there's a real informative video on the Gone with the Wynns site.
Gone With the Wynns
Mobile Power Systems and Solutions for RV, Utility, Fleet and Marine Application
__________________
Desert Kicker
2015 FR3 30DS
|
|
|
06-01-2016, 12:12 PM
|
#8
|
Senior Member
Join Date: Feb 2016
Posts: 308
|
Quote:
Originally Posted by skip1954
Thanks guys, I'm scheduled to get them installed on Tuesday.
|
I have installed the panel on the roof in the past but on my newest trailer I find it must better to keep it "portable".. another words, you can move it into the sun if RV is parked in the shade.. works must better..get more power from it..
__________________
Clint...
2015 F350 4x4 gasser.. 2017 Rockwood 2506S TT
Ardenvoir, Washington (near Wenatchee)
|
|
|
06-01-2016, 12:19 PM
|
#9
|
Member
Join Date: Sep 2014
Location: Richland, WA
Posts: 34
|
I tried posting pictures, but I'm having trouble doing the uploads. I do not turn off the house while running the inverter, but keep in mind that your solar will not be charging at night, so running a TV might run your batteries down fairly quickly.
I really like flymhi's setup, and there's a world of difference between having over 500-Watts of solar and only having 200, but it depends on your needs and budget.
__________________
Desert Kicker
2015 FR3 30DS
|
|
|
06-02-2016, 11:50 AM
|
#10
|
Senior Member
Join Date: Apr 2014
Location: Oxnard So. Cal
Posts: 141
|
Thank you for the quick response. We plug the TV directly into the inverter. The inverter is directly connected into the batteries. I've seen the Wynn's and Go pro videos and a lot of others. I was just concerned about how I would know if the batteries are fully charged or drained down enough to stop (without getting under the coach with an amp meter continuously) . I guess I will have to get a monitor and figure away to install it. Just leary of these stock deep cycle batteries and hate to ruin them on first outing. I know they don't hold a lot of amp hours. I looked all over the batteries and see no markings at all as to the make or amperage so I must assume about 70 amps each =140 amp hrs. (not much) about 50 amp hrs usable. About 4hrs of TV with the heater & Fridge on per night. Next day would be dedicated to charging up with panel and gen if needed. Living on a shoe string with battery power till we upgrade to 6v batteries and figure out a way to build a bigger battery box in the same location. Like most we want 4 6v batteries Like always, projects over run the cash flow
__________________
2016.5 FR3 30DS AKA "Serenity"
Searching for that perfect spot with loving Wife & 2 mini dachshunds
|
|
|
07-28-2016, 08:09 AM
|
#11
|
Member
Join Date: May 2016
Location: Indianapolis
Posts: 97
|
Screw Size
I'm installing solar panels on FR3 roof this weekend. Can not find anything that tells me the length of screw recommended for installing the panel brackets.
Bear
|
|
|
07-28-2016, 09:21 AM
|
#12
|
Senior Member
Join Date: Nov 2015
Location: Pleasant Gap, PA
Posts: 458
|
Unless you are 100% certain you are going to hit framing for the roof do not use any type of construction screw to hold the panel down. The sheathing is very thin and does not provide enough bite for screws to hold. If you have a fiberglass roof many people have had good success with adhesives. If it is a rubber, EPDM, or TPO roof you will need some type of anchor (well nut, toggle bolt) to secure the panel.
__________________
2015 Solaire 201SS
2015 GMC 2500HD Duramax
|
|
|
07-28-2016, 09:56 AM
|
#13
|
Member
Join Date: May 2016
Location: Indianapolis
Posts: 97
|
Thank u
I was afraid of that.
|
|
|
07-28-2016, 10:30 AM
|
#14
|
Senior Member
Join Date: Nov 2015
Location: Pleasant Gap, PA
Posts: 458
|
I used well nuts. Here is what I did:
-mark locations for the holes.
-Drilled holes. CAUTION: I have a TPO roof. The TPO membrane is very thin and the drill bit will pull it up around the hole. Drill a hole in a thin scrap of wood. Line this up with the location for the hole in the roof. Keep pressure on the wood to minimize the roof membrane getting pulled up by the drill bit.
-Put lap sealant in the holes and surrounding area where mounting brackets will contact roof.
-Insert well nuts and bolt down the brackets. Apply downward pressure to the brackets so that the well not does not pull out of the roof before it has expanded.
-Apply generous amount of lap sealant over and around the mounting brackets.
-Install panel.
The lap sealant can be a bit messy so be prepared with wet rags for clean up.
__________________
2015 Solaire 201SS
2015 GMC 2500HD Duramax
|
|
|
07-28-2016, 12:52 PM
|
#15
|
Senior Member
Join Date: Aug 2013
Location: Florida
Posts: 486
|
Why would you not use a leather punch cutter to make a clean hole in rubber so the drill bit doesn't touch rubber.
|
|
|
07-28-2016, 06:13 PM
|
#16
|
Member
Join Date: May 2016
Location: Indianapolis
Posts: 97
|
Dumb Question
So there is nothing underneath / Plywood or ?
Bear
|
|
|
07-29-2016, 10:41 AM
|
#17
|
Senior Member
Join Date: Nov 2015
Location: Pleasant Gap, PA
Posts: 458
|
StephanFR3 - good idea. I did not think about that.
Bearister - the plywood underneath is only 3/8" (maybe thinner). I would not trust construction screws to hold for several years of driving at 65 MPH.
__________________
2015 Solaire 201SS
2015 GMC 2500HD Duramax
|
|
|
07-29-2016, 10:50 AM
|
#18
|
Member
Join Date: May 2016
Location: Indianapolis
Posts: 97
|
Thank U
Is there room for a molyplug ?
Bear
|
|
|
07-29-2016, 11:08 AM
|
#19
|
Senior Member
Join Date: Nov 2015
Location: Pleasant Gap, PA
Posts: 458
|
Not sure what a molyplug is.
There should be 2-3" between the roof and the ceiling inside. The type of insulation under the roof might affect the type of anchor that will work. Block foam insulation might be a problem but fiberglass probably not so much.
__________________
2015 Solaire 201SS
2015 GMC 2500HD Duramax
|
|
|
07-29-2016, 11:49 AM
|
#20
|
Senior Member
Join Date: Jan 2015
Location: Englewood FL
Posts: 2,797
|
X2. Well nuts are perfect for this and they have them at Home depot and Lowes.
__________________
2015 335DS
|
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|