|
06-18-2018, 08:45 AM
|
#1
|
Senior Member
Join Date: Mar 2017
Posts: 206
|
Oil on the Toad
Does anyone else remember a post about a mod to the coach (the oil breather valve, I believe) to reduce or eliminate oil on the front of the Toad? I've searched this forum every which way I can think of and can't find.
__________________
2014 Legacy SR300 340BH
2021 Jeep Gladiator
|
|
|
06-18-2018, 09:08 AM
|
#2
|
Senior Member
Join Date: Jan 2016
Location: x
Posts: 12,423
|
I don't know the post, but here is a link to a universal catch can to stop the oil drip from the breather. https://www.amazon.com/Universal-Res.../dp/B01B9G0BW0
__________________
Retired Navy
Jake my sidekick (yellow Lab) 10/04 - 05/20
2017 RAM 2500 CC 4X4 Cummins Diesel
2016 Flagstaff 26 FKWS
AF&AM & El Korah Shrine of Idaho
|
|
|
06-18-2018, 09:25 AM
|
#3
|
Senior Member
Join Date: Mar 2017
Posts: 206
|
Quote:
Originally Posted by SeaDog
|
Gotcha, thanks
__________________
2014 Legacy SR300 340BH
2021 Jeep Gladiator
|
|
|
06-18-2018, 09:53 AM
|
#4
|
Senior Member
Join Date: Jan 2017
Posts: 3,290
|
I had this happen to my Palazzo and Ford Focus toad after a 'service' from Speedco - they had overfilled the oil, and the oil tube was allowing the excess to drip/flow out and be blown all over the toad, the tow bar, and even up on the rear of the coach. I also saw it dripped on the cement after we stopped at a Walmart about 50miles up the road, right under the tube.
I fought the idea of trying to 'capture' the oil, or somehow stop it at the tube, and releasing ALL the 'extra' oil was the real answer. No more oil out the tube.
In the process, I also found that next time I will service my own coach, changing my own oil, as the filters are actually easy to access with the bags aired up, and the oil pan has two exit holes, a typical one on the bottom, and also one on the driver side of the oil pan, which makes for a much easier, more controlled, release of the oil into a container. Not near as messy as I would have believed.
__________________
The Turners...
'07 Rockwood Signature Ultralight...
two Campers and two Electric cars : )
|
|
|
06-20-2018, 08:20 AM
|
#5
|
Senior Member
Join Date: Mar 2017
Posts: 206
|
Quote:
Originally Posted by formerFR
I had this happen to my Palazzo and Ford Focus toad after a 'service' from Speedco - they had overfilled the oil, and the oil tube was allowing the excess to drip/flow out and be blown all over the toad, the tow bar, and even up on the rear of the coach. I also saw it dripped on the cement after we stopped at a Walmart about 50miles up the road, right under the tube.
I fought the idea of trying to 'capture' the oil, or somehow stop it at the tube, and releasing ALL the 'extra' oil was the real answer. No more oil out the tube.
In the process, I also found that next time I will service my own coach, changing my own oil, as the filters are actually easy to access with the bags aired up, and the oil pan has two exit holes, a typical one on the bottom, and also one on the driver side of the oil pan, which makes for a much easier, more controlled, release of the oil into a container. Not near as messy as I would have believed.
|
I did have mine serviced at Freightliner right before this trip. So, unless I bleed a couple of quarts off I just have to let it relieve the excess on its own the way it is doing?
__________________
2014 Legacy SR300 340BH
2021 Jeep Gladiator
|
|
|
06-20-2018, 08:50 AM
|
#6
|
Senior Member
Join Date: Jan 2017
Posts: 3,290
|
check your dipstick first, and make sure that it is at full or slightly less than full, because that will tell you if there’s too much oil already in the system, in which case yes you will just have to ride it out, or relieve some of the excess oil
Check on your Freightliner service ticket and see if it says how much oil that they filled your system with, as it should be maybe 15 quarts, thereabouts
__________________
The Turners...
'07 Rockwood Signature Ultralight...
two Campers and two Electric cars : )
|
|
|
06-20-2018, 10:47 PM
|
#7
|
Senior Member
Join Date: Oct 2015
Posts: 1,502
|
If you are going to use a "catch-can" may I recommend a Provent Crank Case Ventilation Filter? It has safety features built in and a replaceable element used to capture oil.
When I buy a diesel, the first thing I do to it is install a Provent CCV.
|
|
|
06-20-2018, 10:56 PM
|
#8
|
Senior Member
Join Date: Mar 2017
Posts: 206
|
Quote:
Originally Posted by Skyliner
If you are going to use a "catch-can" may I recommend a Provent Crank Case Ventilation Filter? It has safety features built in and a replaceable element used to capture oil.
When I buy a diesel, the first thing I do to it is install a Provent CCV.
|
Thanks Skyliner, I'll check it out.
__________________
2014 Legacy SR300 340BH
2021 Jeep Gladiator
|
|
|
06-26-2018, 07:44 AM
|
#9
|
Senior Member
Join Date: Mar 2017
Posts: 206
|
So, it wasn't oil but diesel fuel! Looking at the tires during a driving break, I noticed fuel dripping from a filter (fuel or water separator, I don't know). Next stop, I was able to get under there and tighten it down. Arrived in North Dakota with a clean Toad [emoji4]
__________________
2014 Legacy SR300 340BH
2021 Jeep Gladiator
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|