Cherokee 28BH TP Holder Question?

[Big Dawg]

Where did you mount a TP holder on your Cherokee? We have been talking about it this afternoon, and come to a spot that we like.

[pip]

i hung a towel rack on bathroom door & used bottom rung to hang tp from, installed a wing nut type bolt so all you have to do is remove wing nut to replace tp, don't know if its the best place but it works for us. here is a picture of it ( if i did the picture att. right )

[Big Dawg]

We are thinking about the door right now, was wondering what everyone else did.

[edman87k5]

I put mine on the wall. Was going to put it on the door, but wife wanted it on the wall.

[kmzad]

We have a new 28BH as well. I put the tp holder on the wall next to the toilet. As the bathroom is pretty narrow, I bought a recessed tp holder. I cut 5" X 5" square hole in the wall and almost half the tp roll is inside the wall. Looks great!
Happy Camping!

[Big Dawg]

We decided to go with the door...

[kmzad]

Nice...

I also suggest installing a wall mounted light switch... When my youngsters have to go at night, they can't reach the light switch on the ceiling.

[scubieman]

Tmzad.. Looks like clean wiring up to the light? how did you run the wiring from switch to the light?

[pip]

Wow, nice job kmzad, it looks great, I don't have the guts to cut a hole in the wall yet, I might mess it up somehow !

[Big Dawg]

Originally Posted by scubieman

Tmzad.. Looks like clean wiring up to the light? how did you run the wiring from switch to the light?

I was thinking the same thing. My other camper had a switch in the bathroom, and I liked having it there.

[kmzad]

Thanks!
Well, if you remove the plastic skylight framing in the ceiling, you can access the wires to the light and the fan. The trick is getting behind the wall. I very carefully removed the 1" molding at the ceiling on the wall that is stapled in. I drilling angles up and down behind this molding and fished the wires behind the wall. I wired in a fan/light "in line" switch I bought on ebay for $14. I then put the molding back making sure to use the same staple holes. You can't tell it was removed and the holes I drilled are completely hidden behind the molding...