|
08-02-2017, 02:08 PM
|
#1
|
Junior Member
Join Date: Nov 2015
Location: Canyon Country
Posts: 23
|
2016 Dynamax REV 24TB
Before our next trip, I am going to replace the OEM shocks with Bilsteins and Super Springs. This will improve the ride and sway as well as gain maybe an inch at the rear of the coach. There is a post showing a modified drain outlet and I want to avoid poking out the side skirt. Is there a part number or supplier which makes a swivel fitting for that size?
I would like to order extra interior LEDS and rectangular table if possible. The round table is nice but not for extra people. I would guess this is available through Dynamax. Thanks from Cali
__________________
“Very little is needed to make a happy life; it is all within yourself in your way of thinking.”
― Marcus Aurelius
|
|
|
08-03-2017, 08:22 AM
|
#2
|
Commercial Member
Join Date: Nov 2007
Location: Bristol, IN
Posts: 18,979
|
LED's could be done...but if we don't have a different table designed, it would not be available. We design the table, create a part number and have it built in quantity.
|
|
|
08-03-2017, 01:59 PM
|
#3
|
Junior Member
Join Date: Nov 2015
Location: Canyon Country
Posts: 23
|
2016 Dynmax REV 24TB options
Thank you BC,
I found the table I was asking about in a youtube walkthrough on a 2017 REV. I am trying to reach some one in parts to provide a part number.
__________________
“Very little is needed to make a happy life; it is all within yourself in your way of thinking.”
― Marcus Aurelius
|
|
|
08-03-2017, 02:07 PM
|
#4
|
Junior Member
Join Date: Nov 2015
Location: Canyon Country
Posts: 23
|
2016 Dynmax REV 24TB options
I forgot the table picture. Also included that optional drain outlet some folks have mentioned. Any help getting the parts would be great. Thanks for your time
__________________
“Very little is needed to make a happy life; it is all within yourself in your way of thinking.”
― Marcus Aurelius
|
|
|
08-03-2017, 03:11 PM
|
#5
|
Commercial Member
Join Date: Nov 2007
Location: Bristol, IN
Posts: 18,979
|
Ah...well, that is the table we put in the 24TB still today.
The swivel adaptor you see is also something we added here...I went to that after some people on here did some modifications. The ones done on here, they pivot it and send it through the side panel of the skirt. That orange one, is just a clear 45 swivel adaptor we added that lets you swivel it up and out of the way when not in use. That is also on all the 2017 and 18 builds by us.
I'll get those part numbers from engineering, so you can just give them to parts or dealer to order.
|
|
|
08-03-2017, 03:52 PM
|
#6
|
Junior Member
Join Date: Nov 2015
Location: Canyon Country
Posts: 23
|
2016 Dynmax REV 24TB options
Thank you again BC,
Would there be any chance for a Truma Combi retrofit for my rig?
__________________
“Very little is needed to make a happy life; it is all within yourself in your way of thinking.”
― Marcus Aurelius
|
|
|
08-03-2017, 03:56 PM
|
#7
|
Commercial Member
Join Date: Nov 2007
Location: Bristol, IN
Posts: 18,979
|
Lol...that one I think is a bit trickier. We haven't tackled that one, so wouldn't even know where to start. Nice little system though.
|
|
|
08-04-2017, 03:10 PM
|
#8
|
Commercial Member
Join Date: Nov 2007
Location: Bristol, IN
Posts: 18,979
|
The countertop is foam core from American Stone Cast.
American Stonecast-25”x26 ½”-ASC-2526-DY
The swivel adaptor is Camco-45 degree Clear #39847
|
|
|
09-05-2017, 02:26 PM
|
#9
|
Junior Member
Join Date: Aug 2017
Location: Dousman, WI
Posts: 10
|
2018 REV 24TB Beds and tables
So, I'm wondering about something. I have the 24TB and the floor plan shows a flex bed system where you can make the twin beds into one larger bed - but there's no way to do this. I see the earlier models had headboards that went across the aisle, but my REV did not come with these. Any way I can get them?
Also, my rev came with two table tops but only one post - what's the deal with that? I took care of this problem myself by having another post fabricated, but I made it taller for the back table since it was impossible to get in and out of the beds with the table installed. The front square table is also very awkward to get around. I'm having two tabletops fabricated through Etsy. One small one to act as a bed stand in the back and the other is skinnier and longer to use as my main dining table. They should look really cool and be functional. I'll post a picture as soon as they arrive and I have them installed.
|
|
|
09-05-2017, 02:41 PM
|
#10
|
Commercial Member
Join Date: Nov 2007
Location: Bristol, IN
Posts: 18,979
|
Should be two rectangular tables. Both of those get put into place between the twin beds to make one big bed. No posts. The old headboards would not fit with the new design.
|
|
|
09-05-2017, 03:10 PM
|
#11
|
Commercial Member
Join Date: Nov 2007
Location: Bristol, IN
Posts: 18,979
|
Zac was kind enough to shoot me these.
|
|
|
09-05-2017, 03:25 PM
|
#12
|
Junior Member
Join Date: Aug 2017
Location: Dousman, WI
Posts: 10
|
Just saw your pictures. I didn't get those bolsters with my TB - should I have? Vic
|
|
|
09-05-2017, 03:36 PM
|
#13
|
Commercial Member
Join Date: Nov 2007
Location: Bristol, IN
Posts: 18,979
|
Most likely. sometimes we ship them and the dealer takes them out. So if it is marked on our ship loose list and the dealer did not mark them as missing, the dealer would need to order a set.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|