I understand. I'm also in SoCal, Running Springs. Rig is currently at Lake Havasu. Had to come home to get the registration papers for license. Will do that in Blythe. Thanks for your assistance.
No problem, happy to help. I had to do this to our 2018 on the road in Texas, they work great now. Lots of good info and great people here on the forum
Yep. Had to do this to mine this past week while in Ocean City, MD. I left the screw covers off both units because I have to go back and tape them in place so they don't move again. Also notice that some of the screws to the covers won't snug up...I'm going to put some anchors in the ceiling so they will.
__________________
Andy & Debbie Shultz
Harrisburg, PA
2021 Dynaquest XL 3801TS
If you look at the flash drive there should be "installation instructions...not at the office or I would post. It shows how to install the baffles.
As a side note, it does not ask for tape. The foam baffles have an adhesive strip on the edges that are supposed to hold them in place. It doesn't appear that we're doing anything wrong, just that we need to add on to the mfg's installation instructions for best results.
__________________ If "Search this Forum" does not yield answers, please post questions as a "New Thread" (instead of asking privately) so others can benefit from the answers.
Linear Mode
