Still heading home from the rally. Currently in TX.
One of the bedroom drawers fails to maintain the self closing function. I can fix it by pulling the spring loaded plate forward at the end of the slide and it will hold for about a day. When it fails again the drawer will fly out.
We have same issue, now I have small ball bearings all over the floor. Going to replace the slides when we get back to SoCal. I use a big pillow wedged at the base of bed to keep them closed for now
I think they get misaligned sometimes. I installed drawers in my master closet and used those same guides as the local stores did not have the odd size I needed. Some would do the same thing and it was in most cases because the backs were to far apart and so it would not always engage.
__________________ If "Search this Forum" does not yield answers, please post questions as a "New Thread" (instead of asking privately) so others can benefit from the answers.
There’s a much better brand out there that’s more heavy duty than the ones that came on my Isata 3. I have a friend who’s a retired custom cabinet maker and he turned me on to this brand.
(Side mount) Acuride full extension side mount
(Under mount) Grass.
__________________ 2008 Dynaquest 340xl
Bill and Carol
Retired mechanic
US Army Veteran 🇺🇸
Previous coach 2017 Isata 3RW
Also,3 Diesel pushers, 1Bvan, 2 class Cs
There are better brands...the issue is not all brands make all sizes.
I am also a big fan of the King Slides...that is a heavier, more robust drawer guide. We have changed to those on the 20" and 23" for the dinette drawers because they carry more weight. They are more money, but I think more reliable. They also, so not make every size.
__________________ If "Search this Forum" does not yield answers, please post questions as a "New Thread" (instead of asking privately) so others can benefit from the answers.
2008 Dynaquest 340xl
Linear Mode
