Isata 5 DB Shower question

[janeenb]

I thought about the magnet idea but wasn't sure about attaching them to the pan. This works pretty well for now. I just wish we could find a solution for the shower faucet. All the pictures I see of other Isata 5's have 2 separate faucet handles (1 hot 1 cold) ours has this big lever that pulls out to turn on then adjusts left or right for temp. in that small of shower space we are constantly bumping it and getting blasted with cold or hot water or turning it partially off. We are very average size people, I think if we could get a different style faucet we would be set.

[vrunner]

This is what we have.

[janeenb]

I wish thats what ours was. Here is a pic of it. The lever sticks out so far when its turned on and is touchy!

[janeenb]

[Webefine]

That looks like the same one in my DX3, if it is I cut a couple inches off of mine and rounded the end. Looks pretty much the same as it did just shorter which helped alot. I will get a picture later.

[LandKKnight]

Originally Posted by cavie

Try a Curved rod as found in some motels. that should solve your problem. Home Depot

https://www.homedepot.com/p/Glacier-...BNHD/204383145

We put an articulated rod that pushed out from the pan for showering but would also push back into the shower space in our TT and it worked great, along with giving the feeling of a bigger space to shower in, it also gave you the bathroom space back when you needed it. I believe we got it at camping world. Our 2018 30fw curtain is on a track top and bottom so can't "attack".

[youroo]

Originally Posted by vrunner

This is what we have. Attachment 171512

If you live in a COLD area and Winterize with Air the Controls are "Upside Down"! Little bit of water will pool in Top fitting! Youroo!!

[vrunner]

Originally Posted by youroo

If you live in a COLD area and Winterize with Air the Controls are "Upside Down"! Little bit of water will pool in Top fitting! Youroo!!

Yup... already saw that. We use anti freeze so no issues on that.

[janeenb]

Originally Posted by Webefine

That looks like the same one in my DX3, if it is I cut a couple inches off of mine and rounded the end. Looks pretty much the same as it did just shorter which helped alot. I will get a picture later.

Awesome idea. It works great now! Thanks for the tip.