Isata 5 toilet

[Ctoth11]

No power to our toilet. All fuses say ok on panel. Is there another fuse panel anywhere?

[Ctoth11]

When I went through fuse description there was not a fuse labeled the toilet. So maybe it has another fuse somewhere

[VinceU]

Originally Posted by Ctoth11

When I went through fuse description there was not a fuse labeled the toilet. So maybe it has another fuse somewhere

Most likely inline within the base or the cable leading to it.

[Ctoth11]

I would love some help with this toilet issue as the dealer can not get it in to look at it till the 12 of July. This has to be a simple fuse problem I am. Guessing

[zgipson]

Originally Posted by Ctoth11

I would love some help with this toilet issue as the dealer can not get it in to look at it till the 12 of July. This has to be a simple fuse problem I am. Guessing

I have no technical knowledge of the toilet in the Isata 5, so I'm afraid I am of little help here. Have you called our customer service department or the manufacturer (I believe it Tecma) of the toilet yet? Our service department's number is 888-295-7859 ext. 212 or dynamax-service@forestriverinc.com

[Ctoth11]

Thank you. I will

[bclemens]

On the Tecma's there is a pigtail that is installed by Tecma on the toilet. We don't do anything with those, but I have sen many of them come loose. We have talked about tapping their connection.

[Ctoth11]

Do I need to remove toilet and look underneath for that connection?

[bclemens]

Yes...I assume it was working before? The diagram for the Team actually shows this connection a little bit better than what I show. The multiplex panel should tell you if there is a fuse out. Have you looked at the mani panel at the foot of the bed?

[Ctoth11]

Thanks bclemens. I pulled toilet and the wires had a bad butt connection and ground was disconnected. Thank you