solved sewer hose storage issue on 24rb

[richy2]

I finally figured out a way to store 15' of sewer hose on my new 24rb. As you know, the existing hose storage is almost useless. I found room inside the lower curbside panel to mount a hose carrier. I shortened the one I used on my trailer to fit perfectly.

[SeaDog]

good job you may want to repost to "what I did to my camper today" I think thats the thread so more folks will see how you solved your problem

[Sandiegodoug]

Here is how I solved sewer hose issue on my
Isata 3. W
Now can fit a long hose in original compartment.

[caswelld]

Looks good Sandiegodoug I was wondering if a bend in the storage tube would work, well it sure does! Good job & thanks for posting the pics.

One question, does the elbow attached to the sewer hose fit into the storage tube?

This may be a solution that BC could consider for the Isata 3FWs. I would rather have to walk around the MH to get the hose than use up precious storage space.

We should take delivery of ours in a week or two. BC is just now polishing it up before sending it south
I'll be looking at putting something like that on ours. Thanks.



Dave

[Sandiegodoug]

Yes, it’s drainage pipe I got at Home Depot. There are 2 elbows, a tight one and one with a big angle
The big angle fit perfectly. Then just buy some drain pipe, cut a piece long enough to reach crossmember. About 5 bucks worth of parts , and now a big sewer hose fits. I didn’t glue up yet just used duct tape, seems to hold